TopicsList of Topics and Articles
Sky & Freesat 'stronger frequencies' & Reboot Instructions for Sky boxes. • AstraSat Services
10905 V 22.0 5/6 ITV CHANNEL IS 'NO SKY CARD REQUIRED'
12402 V 27.5 2/3 ANGLIA WEST, CENTRAL SW ETC 'SKY CARD REQUIRED'
At the moment there are no alternative 'stronger' frequencies for ITV2,ITV3,ITV4 or their +1 services.
'Sky card required'
12480 v 27.5 2/3
BBC RED BUTTON 'STREAMS' SPORTS
not tested by myself yet.....
11954 H 27.5 2/3-5/6
PRESS YELLOW BUTTON NEXT TO CHANNELS NAMED= 6711,6712,6713,6714,6715.
THERE WILL BE VIDEO BUT NO SOUND, SO......
GO INTO SYSTEM SET-UP, LANGUAGE & SUBTITLES, THEN CHANGE THE FAVOURITE LANGUAGE TO ANYTHING OTHER THAN ENGLISH......
"NO SATELLITE SIGNAL IS BEING RECEIVED"
This usually means that your Digibox is blocked and unable to receive the
signals it requires. This usually occurs after power cuts or other interruptions to the
Digibox power supply.
Remove the power cable from the Digibox only. This can be found on the back of the Digibox, and is normally a black cable on
either the extreme left or right of the Digibox. Reinsert the power cable after 30 seconds.
Turn on the Digibox.
On the Sky remote control press the SERVICES button
On the Sky remote control press 401 (four zero one) and then the SELECT button.
If the above has been done correctly you should see the Installer Setup Menu
screen. If you do not see the Installer Setup Menu screen then start this process
Press “2” on your Sky remote control.
If done correctly should be looking at the Default Transponder screen.
On the Sky remote control press 12207(one two two zero seven). This will change
the default FREQUENCY to 12.207.
Ensure that the default POLARIZATION is “V”.
Ensure that the default SYMBOL RATE is “27.5”.
Ensure that the default FEC is “2/3”.
Select SAVE NEW SETTINGS and return you to the Installer Setup Menu screen.
Press "5" on your sky remote control.
Now select "find channels".
Once the signal bars have appeared (this may take a couple of attempts) press select on your Sky remote then highlight any Sky News and press the YELLOW button on your Sky remote, Now press select to save the selected channels.
Press SERVICES on your Sky remote and select OTHER CHANNELS from the menu, now press select on Sky News. DONE